×

Click for
Table of Contents

menuAM-5AC22-45 Quick Start Guide

Package Contents

Antenna
Protective Shroud
U-Brackets (Qty. 2)
Pole Brackets (Qty. 2)
Pole Clamps (Qty. 2)
Carriage Bolts (Qty. 4)
Serrated Flange Bolts (Qty. 4)
Serrated Flange Nuts (Qty. 8)
Weatherproof RF Cables (Qty. 2)

Installation Requirements

Hardware Installation

  1. Note: Orient both U-Brackets as shown.

  2. Note: Hand-tighten the bolts.

  3. Note: The antenna has an electrical downtilt of 2°.

  4. Note: The brackets may slide along the pole, depending on the angle of the elevation tilt.

Specifications

AM-5AC22-45

Dimensions

750 x 215 x 94 mm

(29.53 x 8.47x 3.70")

Weight (Mount Included)

6 kg

(13.23 lbs)

Frequency

5.15 - 5.85 GHz

Gain

22 dBi

HPOL Beamwidth

45° (6 dB)

VPOL Beamwidth

45° (6 dB)

Elevation Beamwidth

Electrical Downtilt

Max. VSWR

1.5:1

Wind Survivability

200 km/h

(125 mph)

Wind Loading

347 N @ 200 km/h

(78 lbf @ 125 mph)

Polarization

Dual Linear

Cross-Pol Isolation

30 dB Min.

ETSI Specification

EN 302 326 DN2

Mounting

Universal Pole Mount, Rocket Mount Bracket, and Weatherproof RF Cables Included

Safety Notices

  1. Read, follow, and keep these instructions.
  2. Heed all warnings.
  3. Only use attachments/accessories specified by the manufacturer.

Warning

WARNING: Do not use this product in location that can be submerged by water.

Warning

WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

Electrical Safety Information

  1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.
  2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.

Limited Warranty

ui.com/support/warranty

The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions.

Compliance

RF Exposure Warning

The antenna and transmitter must be installed to provide a separation distance from all persons and must not be located or operating in conjunction with any other antenna or transmitter. For the specific separation distance, refer to the Quick Start Guide for your Rocket device (transmitter).

L’antenne et l’émetteur doit être installé pour fournir une distance de séparation de toute les personnes et ne doit pas être situé ou opérant en conjonction avec une autre antenne ou un autre émetteur. Pour la distance spécifique de séparation, se référer au Guide de démarrage rapide pour votre appareil Rocket (l’émetteur).

WEEE Compliance Statement

Declaration of Conformity

Online Resources

SupportCommunityDownloads