Package Contents
 |
|---|
| Camera |
 |
|---|
| PoE Adapter (24V, 0.5A) |
 |
|---|
| Power Cord |
 |
|---|
| Hex Key |
 |
|---|
| Metal Strap |
 |
|---|
| Screws (M4x30, Qty. 4) |
 |
|---|
| Screw Anchors (Qty. 4) |
 |
|---|
| Mounting Template |
Wall-Mounting Requirements
- Drill
- Drill bit, 7 mm
- Phillips screwdriver
Pole-Mounting Requirements
- Screwdriver or 7 mm socket driver
Hardware Overview
 Reset Button |
|---|
To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the camera is powered on. |
 microSD Card Slot |
Reserved for future use. |
 Ethernet LED |
The Ethernet LED will light steady green when an active Ethernet connection is made and flash when there is activity. |
 Ethernet Port |
The 10/100 Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. |
 Power LED |
The Power LED will light steady amber when the camera is connected to a power source. |
Camera Hex Bolt |
|---|
Use the Hex Key to adjust the camera rotation. |
Tilt Hex Bolt |
Use the Hex Key to adjust the tilt. |
Base Hex Bolt |
Use the Hex Key to adjust the base rotation. |
Before You Begin
Please note the following before installation:
- The sun shade is easiest to attach prior to installing the camera.
- The camera should never point straight up or straight down. Always ensure it is at least two clicks from the straight up or down position.
- If the camera is mounted outdoors, there should be a 150 mm (6") drip loop to prevent water from creeping along the cable to the camera.
Optional: Using the Sun Shade
Connecting Ethernet
- Proceed to the appropriate mounting instructions:
Wall Mounting
- Proceed to “Connecting Power”.
Pole Mounting
Connecting Power
OR
Adjusting the Camera View
For details on using the UniFi Video software, refer to the User Guide at: ui.com/download/unifivideo
Specifications
|
UVC |
|
|
Dimensions |
225 x 75 x 75 mm (8.85 x 2.95 x 2.95") |
|---|---|
|
Weight |
373 g (13.1 oz) |
|
Ports |
(1) 10/100 Ethernet Port, microSD Card Slot |
|
Sensor |
Progressive Scan RGB CMOS ¼" |
|
Lens |
3.6 mm/ F1.8 |
|
Power LED |
Amber |
|
Link/Activity LED |
Green |
|
Buttons |
Factory Reset Button |
|
Power Method |
Passive Power over Ethernet (12-24V) |
|
Power Supply |
24V, 0.5A PoE Adapter Included |
|
Max. Power Consumption |
4.5W |
|
Mounting |
Pole/Wall/Ceiling |
|
Operating Temperature |
-30 to 50° C (-22 to 122° F) |
|
Operating Humidity |
20 - 90% Noncondensing |
|
Certifications |
CE, FCC, IC |
|
Video |
|
|
Video Compression |
H.264 |
|---|---|
|
Resolution |
1 MP/HDTV 720p |
|
Maximum Frame Rate |
30 FPS |
|
Image Setting |
Brightness, Contrast, Sharpness, Saturation, Noise Reduction, 50/60 Hz |
|
General |
|
|
Processor |
ARM 1136J-S, 528 MHz |
|---|---|
|
Memory |
256 MB DDR3 |
|
View Angle |
56.14° (H) 36.86° (V) 64.33° (D) |