Package Contents

Hardware Overview

LED
The LED will light steady blue during bootup. When the camera is ready to connect to the Wi-Fi network, the LED pattern will flash two times accompanied by two beep tones. Once connected to the network, the LED will glow a breathing pattern.
Reset
To reset network settings to factory defaults, press and hold the Reset button until the camera beeps two fast tones.

Installation

Extend the Power Cable

The Power Adapter has an extendable power cable that is concealed inside the adapter casing.

1. 

2. 

3. 

4. 

Mounting Options

The camera may be used free-standing or mounted in several ways:

• “Magnetic Mounting”
• “Mounting with Tape”
• “Wall Mounting with Screws”
• “Corner Mounting with Screws”

Magnetic Mounting

1. 

2. 

3. Go to “Attaching the Camera”.

Mounting with Tape

1. 

2. 

3. 

4. Go to “Attaching the Camera”.

Wall Mounting with Screws

1. 

Optional



2. 

Optional



3. 

Optional



4. 

5. Go to “Attaching the Camera”.

Corner Mounting with Screws

1. 

2. 

3. 

4. 

5. 

Attaching the Camera

1. 

2. 

3. 

4. 

5. 

6. 

Recommended

	Note: Six Cable Clips with adhesive tape are included to help hold the power cable in place.

Specifications

UVC-Micro
Dimensions	40.7 x 40.7 x 40.8 mm (1.61 x1.61 x 1.61")
Weight	53 g (1.87 oz)
Network Interface	2.4/5 GHz Dual-Band Wi-Fi
Sensor	Progressive Scan RGB CMOS 1/4"
Lens	EFL=2.38 mm / F2.4
View Angle	79.13° (H), 54.15° (V), 88.45° (D)
Night Mode	Infrared LEDs with Mechanical IR Cut Filter
Video Compression	H.264
Resolution	720p HD (1280 x 720)
Max. Frame Rate	30 FPS
Microphone	Yes
Speaker*	Yes
Power Supply	5.5V (5,5V) Adapter with Extendable Power Cable
Max. Power Consumption	3.2W
Mounting	Wall/Ceiling/Corner Kit
Operating Temperature	0 to 35° C (32 to 95° F)
Operating Humidity	20 to 90% Noncondensing
Certifications	CE , FCC, IC

* Functionality coming soon with a software update