Package Contents
Camera |
Tightening Tool |
Screw Anchors (Qty. 2) |
Self-Tapping Screws (Qty. 2) |
Pole Mount Bracket |
Machine Screws (Qty. 2) |
Installation Requirements
- Pole-mounting: Two metal straps / hose clamps (not included)
- Shielded Category 5 (or above) cabling with drain wire should be used for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable
- Surge protection should be used for all outdoor installations. We recommend that you use two Ethernet Surge Protectors, model ETH-SP, one near the camera and the other at the entry point to the building. The ETH-SP will absorb power surges and safely discharge them into the ground.
Hardware Overview
Ethernet Port |
---|
10/100 RJ45 port connects to an 802.3af/802.3at or 24V Passive PoE switch for PoE power and data. |
Reset Button |
To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the camera is powered on. |
Hardware Installation
Wall/Ceiling Mount
-
- Proceed to the Connecting Power section.
Or
Pole Mount
Connecting Power
The UVC G3 Pro supports 802.3af, 802.3at, and 24V Passive PoE and can be powered by any 802.3af/802.3at or 24V Passive PoE compliant switch, such as a UniFi PoE Switch.
Connect the Ethernet cable from the camera directly to a PoE port on the switch.
Setting Up UniFi Protect via App
Download and install the UniFi Protect Mobile App to configure the UVC-G3-PRO.
Launch the UniFi Protect Mobile App and follow the on-screen instructions to complete setup.
Adjusting the Camera View
Specifications
UVC-G3-PRO |
|
Dimensions |
Ø 86 x 153 mm (Ø 3.39 x 6.02") |
---|---|
Weight |
700 g (1.54 lb) |
Enclosure |
UV Stabilized Polycarbonate and Die-Cast Aluminum |
Networking Interface |
(1) 10/100 Ethernet Port |
Sensor |
Sony IMX290, 1/2.8" |
Lens |
3-9 mm, f/1.2-f/2.1 Powered Zoom Lens |
Field of View |
|
Wide | 108° (H), 58° (V), 125° (D) |
Tele | 37° (H), 20° (V), 43° (D) |
Night Mode |
IR LEDs with Mechanical IR Cut Filter |
Video Compression |
H.264 |
Resolution |
1080p Full HD (1920 x 1080) |
Maximum Frame Rate |
30 FPS |
Image Settings |
Flip, Brightness, Contrast, WDR, Hue, Infrared, Sharpness, Saturation, Denoise, 50/60 Hz Flicker Reduction |
Management Interface |
|
Managed Mode | UniFi Protect |
Standalone Mode | Camera Integrated Web UI |
Microphone |
Yes |
Max. Power Consumption |
12.5W |
Power Method |
IEEE 802.3af/at Type 2 PoE or 24V Passive PoE |
Power Supply |
802.3af/802.3at or 24V Passive |
Buttons |
Factory Reset Button |
Mounting |
Wall/Ceiling (Kits Included) |
Operating Temperature |
-20 to 50° C |
Operating Humidity |
0 to 90% Noncondensing |
Weatherproofing |
IP67 |