×

Click for
Table of Contents

menuUVC-Dome Quick Start Guide

Package Contents

Camera
Mounting Template
PoE Adapter (24V, 0.5A)
Power Cord

Required Tool

Hardware Overview

Power LED

The Power LED will light steady amber when the camera is connected to a power source.

Ethernet Port

The 10/100 Ethernet port is used to connect the power and should be connected to the LAN and DHCP server.

Ethernet LED

The Ethernet LED will light steady green when an active Ethernet connection is made and flash when there is activity.

Note: LED operation may be disabled using the Camera Configuration Interface.

microSD Card Slot

Optional microSD recording may be configured in the Camera Configuration Interface. To remove the microSD card, push the card in to release the lock, and then pull the card out.

Reset Button

To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the camera is powered on.

Installation

  1. Optional

Connecting Power

OR

Specifications

UVC-Dome

Dimensions

111 x 96 x 96 mm (4.4 x 3.8 x 3.8")

Weight

178 g (6.28 oz.)

Ports

(1) 10/100 Ethernet Port

Sensor

¼" CMOS Image Sensor

Lens

f=1.96 mm/ F2.0

Power LED

Amber

Link/Activity LED

Green

Night Mode

IR LED with Mechanical IR Cut Filter

Microphone

Yes

Power Method

Passive Power over Ethernet (12-24V)

Power Supply

24V, 0.5A PoE Adapter (Included)

Max. Power Consumption

4W

Mounting

Ceiling Kit Included

Operating Temperature

0 to 40° C (32 to 104° F)

Operating Humidity

20 - 90% Noncondensing

Certifications

CE, FCC, IC

Video

Video Compression

H.264

Max. Resolution

1280 x 720 (HDTV 720p)

Maximum Frame Rate

30 FPS

Image Setting

Brightness, Contrast, Sharpness, Saturation, Noise Reduction, Mirror, Flip, 50/60 Hz

General

Processor

ARM1136J-S 528 MHz

Memory

256 MB DDR3

Flash Memory Support

(1) MicroSD Card Slot

View Angle

88.8° (H)

63.0° (V)

98.2° (D)