Package Contents


UniFi Security Gateway XG


Mounting Brackets (Qty. 2)


UF-RJ45-1G


Bracket Screws (Qty. 8)


Mounting Screws (Qty. 4)


Cage Nuts (Qty. 4)


Rubber Feet (Qty. 4)


Power Cord

System Requirements

Linux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 7 (or above)
Web Browser: Google Chrome (Other browsers may have limited functionality)
UniFi Network Application v5.9 (or newer), available at: ui.com/download/unifi
IMPORTANT: We strongly recommend using UPS backup and power regulation to prevent equipment damage due to stability issues with local AC power.

	IMPORTANT: We strongly recommend using UPS backup and power regulation to prevent equipment damage due to stability issues with local AC power.

Hardware Overview

System LED
Click here for detailed descriptions.
microSD Slot
Reserved for future use.
USB Port
Reserved for future use.
Console Port
RJ45 serial console port for Command Line Interface (CLI) management. Use an RJ45-to-DB9 serial console cable, also known as a rollover cable, to connect the Console port to your computer. Then configure the following settings as needed: Baud rate: 115200 Data bits: 8 Parity: NONE Stop bits: 1 Flow control: NONE
SFP+ (Ports 1 - 8)
SFP+ ports are hot-swappable and support 10 Gbps fiber SFP modules.
RJ45 (Port 0)
RJ45 port supports 10/100/1000 Ethernet connections.
Reset Button
Resets to factory defaults. The UniFi Gateway should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the System LED starts flashing and then becomes solidly lit. After a few seconds, the LED will turn off, and the UniFi Gateway will automatically reboot.
AC/DC PSU Module
One hot-swappable AC/DC PSU module is included.
PSU 2 Module Bay
An optional AC/DC PSU module can be installed in the PSU 2 Module Bay. You also have the option to use a DC/DC PowerModule™, model RPS-DC-100W (sold separately).

Touch LCM

Ports 1-4

Information on each SFP+ port:

Port Speed: 1G or 10G

	Note: There are two groups of ports: ports 1-4 and ports 5-8. All ports in each group operate at the same speed. For example, if port 1 is set to 1G, then ports 2-4 will also operate at 1G.

Port Number: 1 to 4
Interface Type: - Primary WAN; - Other WAN; - LAN port
Throughput: Upload (blue) and download (green) throughput speeds
disconnected: Port is disconnected
disabled: Port is disabled

Select any port to display its Statistics screen.

Ports 5-8

Information on each SFP+ port:

Port Speed: 1G or 10G

	Note: There are two groups of ports: ports 1-4 and ports 5-8. All ports in each group operate at the same speed. For example, if port 5 is set to 10G, then ports 6-8 will also operate at 10G.

Port Number: 5 to 8
Interface Type: - Primary WAN; - Other WAN; - LAN port
Throughput: Upload (blue) and download (green) throughput speeds
disconnected: Port is disconnected
disabled: Port is disabled

Select any port to display its Statistics screen.

System Information

Information on the system:

CPU and RAM usage percentage (red indicates usage of 90% or greater)
Temperature of CPU in° C (red indicates temperature of 85° C or greater)
Uptime of the device
Number of clients (active connections)
Host name
IP address of the primary WAN port

Port 0

Information on RJ45 port 0:

Interface Type: - Primary WAN; - Other WAN; - LAN port
Throughput: Upload (blue) and download (green) throughput speeds

Select Port 0 to display its Statistics screen.

Statistics

Statistics on uploaded (blue) and downloaded (green) data on the selected port (SFP+ ports 1-8 or RJ45 port 0):

Throughput: Total throughput speed in bps/kbps/Mbps/Gbps
Bytes: Total bytes (B)*
Packets: Total packets*
Bar Graphs: Plots of data uploaded and downloaded

Port Details

Details on the selected port (SFP+ ports 1-8 or RJ45 port 0):

# <port><type>: Port 0 to 8; Type: WAN or LAN
IP address(es) assigned to the port
Uptime if port is up; or Disabled or Disconnected if port is down
Latency in ms for the Primary WAN or selected port
Number of clients (active connections) for the Primary WAN or selected port

* Units:
   k = 210 = 1024
   M = 220 ≈ 1,000,000
   G = 230 ≈ 1,000,000,000
   T = 240 ≈ 1,000,000,000,000
   P = 250 ≈ 1,000,000,000,000,000

Installation Requirements

Phillips screwdriver
Standard-sized, 19" wide rack with a minimum of 1U height available
For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use.
For outdoor applications, shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the power supply.
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit: ui.com/toughcable

	Note: Although the cabling can be located outdoors, the UniFi Gateway itself should be housed inside a protective enclosure.

Hardware Installation

Connecting to the WAN

For information about compatible fiber SFP+ modules, visit: ubnt.link/UniFi_SFP_DAC_Compatibility

Connecting to the LAN

Specifications

USG- XG-8
Dimensions	442.4 x 285.6 x 43.7 mm (17.42 x 11.24 x 1.72")
Weight	4.435 kg (9.78 lb)
With Mount Brackets	4.535 kg (9.98 lb)
Max. Power Consumption	AC/DC 100W
Power Supply	(2) Hot-Swappable AC/DC or DC/DC 100W PSU (1 AC/DC PSU Included)
Supported Voltage Range	100 - 240VAC
System LED	Status
Touch LCM	4.7" Wide-Viewing Angle True Color TFT-LCD Touchscreen
Processor	MIPS64 16-Core, 1.8 GHz
System Memory	16 GB DDR4 RAM
On-Board Flash Storage	4 GB
Rackmount	Yes, 1U
ESD/EMP Protection	Air: ± 24 kV, Contact: ± 24 kV
Interfaces
Networking	(8) 10 Gbps SFP+ Ports, (1) 1 Gbps RJ45 Ethernet Port
Management	(1) RJ45 Ethernet In-Band, (1) RJ45 Serial Out-of-Band
Operating Temperature	-5 to 40° C (23 to 104° F)
Operating Humidity	5 to 95% Noncondensing
Certifications	CE, FCC, IC

Enterprise 10G Gateway Router with DPI

Model: USG-XG-8