×

Click for
Table of Contents

menuUS-24-250W, US-24-500W Quick Start Guide

Package Contents

UniFi Switch
Power Cord
Mounting Screws (Qty. 4)
Cage Nuts (Qty. 4)

Installation Requirements

Note: Although the cabling can be located outdoors, the UniFi Switch itself should be housed inside a protective enclosure.

IMPORTANT: We strongly recommend using UPS backup and power regulation to prevent equipment damage due to stability issues with local AC power.

System Requirements

Hardware Overview

System LED

Click here for detailed descriptions.

RJ45 PoE LED (Ports 1 - 24)

Off

No PoE

Amber

IEEE 802.3af/802.3at

Green

24V Passive PoE

RJ45 Speed/Link/Act LED (Ports 1 - 24)

Off

No Link

Amber

Link Established at 10/100 Mbps

Flashing Indicates Activity

Green

Link Established at 1000 Mbps

Flashing Indicates Activity

SFP Speed/Link/Act LED (Ports 1 - 2)

Off

No Link

Green

Link Established at 1 Gbps

Flashing Indicates Activity

RJ45 (Ports 1 - 24)

RJ45 ports support Power over Ethernet (PoE) and 10/100/1000 Ethernet connections.

SFP (Ports 1 - 2)

Hot-swappable SFP ports support 1 Gbps connections.

Reset Button

This button serves two functions for the UniFi Switch:

  • Restart Press and release the Reset button quickly.
  • Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.

Back Panel

Console Port

RJ45 serial console port for Command Line Interface (CLI) management. Use an RJ45-to-DB9, serial console cable, also known as a rollover cable, to connect the Console port to your computer. Then configure the following settings as needed:

  • Baud rate 115200
  • Data bits 8
  • Parity NONE
  • Stop bits 1
  • Flow control NONE

Power Port

Connect the included Power Cord to the Power port.

Hardware Installation

  1.  
  2. OR

Connecting Ethernet

Using SFP Ports

For information about compatible fiber SFP modules, visit: community.ubnt.com/unifi

Specifications

US-24-250W/US-24-500W

Dimensions

485 x 43.7 x 285.4 mm (19.09 x 1.72 x 11.24")

Weight

 

US-24-250W 4.7 kg (10.4 lb)
US-24-500W 4.8 kg (10.6 lb)

Total Non-Blocking Line Rate

26 Gbps

Max. Power Consumption

 
US-24-250W 250W
US-24-500W 500W

Power Method

100-240VAC/50-60 Hz, Universal Input

Power Supply

 
US-24-250W AC/DC, Internal, 250W DC
US-24-500W AC/DC, Internal, 500W DC

Rack-Mount

Yes, 1U High

ESD/EMP Protection

Air: ± 24 kV, Contact: ± 24 kV

Shock and Vibration

ETSI300-019-1.4 Standard

LEDs Per Port

 
RJ45 Data Ports PoE, Speed/Link/Activity
SFP Data Ports Speed/Link/Activity

Interfaces

 
Networking Interfaces (24) 10/100/1000 Mbps RJ45 Ethernet Ports
(2) 1 Gbps SFP Ethernet Ports
Management Interface (1) RJ45 Serial Port Out-of-Band, Ethernet In-Band

Operating Temperature

-5 to 40° C (23 to 104° F)

Operating Humidity

5 to 95% Noncondensing

Certifications

CE, FCC, IC

PoE Per Port

PoE Interfaces

PoE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-)

Max. PoE+ Wattage per Port by PSE

34.2W

Voltage Range 802.3at Mode

50–57V