Package Contents
 |
|---|
| UMA-D Antenna |
 |
|---|
| Ball Joint Mount |
 |
|---|
| Lock Ring |
 |
|---|
| Screws (Qty. 4) |
 |
|---|
| Screw Anchors (Qty. 4) |
 |
|---|
| Hex Bolt |
 |
|---|
| Wall Mount Plate |
 |
|---|
| Metal Strap |
 |
|---|
| RF Cables (Qty. 2) |
Installation Requirements
- UniFi AC Mesh Access Point, model UAP-AC-M
- Wall-mounting: drill and 6 mm drill bit
- Pole-mounting: 7 mm socket wrench
- Phillips screwdriver
- Shielded Category 5 (or above) cabling with drain wire should be used for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable
- Surge protection should be used for all outdoor installations. We recommend that you use two Ethernet Surge Protectors, model ETH-SP-G2, one near the UAP-AC-M and the other at the entry point to the building. The ETH-SP-G2 will absorb power surges and safely discharge them into the ground.
Diagram Showing Use of Ethernet Surge Protectors
Hardware Installation
The UniFi antenna can be mounted on a wall or pole. Go to the appropriate mounting instructions: Wall-Mounting or “Pole-Mounting”.
Wall-Mounting
Pole-Mounting
Specifications
|
UMA-D |
|
|
Dimensions |
201.3 x 128.0 x 32.5 mm (7.93 x 5.04 x 1.28") |
|---|---|
|
Weight |
|
| With Mount | 480 g (16.93 oz) |
| Without Mount | 400 g (14.11 oz) |
|
Enclosure |
Outdoor UV Stabilized Plastic |
|
Supported Frequency Range |
2.4 - 2.5 GHz 5.1 - 5.9 GHz |
|
HPOL Beamwidth |
|
| 2.4 GHz | 90° |
| 5 GHz | 45° |
|
VPOL Beamwidth |
|
| 2.4 GHz | 90° |
| 5 GHz | 45° |
|
Elevation Beamwidth |
|
| 2.4 GHz | 90° |
| 5 GHz | 45° |
|
Maximum VSWR |
2.5:1 |
|
Polarization |
Dual-Linear |
|
Cross-Pol Isolation |
|
| 2.4 GHz | 25 dB |
| 5 GHz | 30 dB |
|
Antenna Gain |
|
| 2.4 GHz | 10 dBi |
| 5 GHz | 15 dBi |
|
Mounting |
Wall/Pole (Kits Included) |