Package Contents
 |
|---|
| UFiber ActiveEthernet |
 |
|---|
| Wall Mount Bracket |
 |
|---|
| Screws (Qty. 4) |
 |
|---|
| Screw Anchors (Qty. 4) |
Installation Requirement
The UF-AE requires an active fiber SFP module and does not support passive GPON SFP modules.
Hardware Overview
Ports
SFP Port |
|
|---|---|
The hot-swappable SFP port supports a 1 Gbps connection. (You can use an SFP+ module; however, the maximum speed is 1 Gbps.) |
|
Ethernet Port |
|
The RJ45 Ethernet port supports a 10/100/1000 connection. To power the device, the port also supports 802.3af active PoE or 24V passive PoE. |
|
Ethernet LED |
|
Off |
Ethernet connection down |
Amber |
10/100 Mbps Ethernet connection up Flashing indicates activity |
White |
1000 Mbps (1 Gbps) Ethernet connection up Flashing indicates activity |
Signal LED |
|
Off |
Optical signal present |
Amber |
Loss of optical signal Check the fiber cable for damage and ensure that it is properly connected on both ends. |
Power LED |
|
Off |
Power off |
White |
Power on |
Hardware Installation
Wall Mounting
Connecting Fiber
The UF-AE requires an active fiber SFP module and does not support passive GPON SFP modules.
|
|
Note: You can use an SFP+ module; however, the maximum speed is 1 Gbps. |
|---|
Connecting LAN
Connecting Power
OR
|
|
Note: The airCube AC provides a 1 Gbps Ethernet connection and Wi-Fi connectivity with PoE passthrough, so it is the ideal complement to the device for CPE installations. |
|---|
OR
|
|
WARNING: The switch port must comply with the power specifications listed in this Quick Start Guide. |
|---|
Specifications
|
UF-AE |
|
|
Dimensions |
76.5 x 76.5 x 26.4 mm |
|---|---|
|
Weight |
68 g (2.40 oz) |
|
Networking Interfaces |
(1) 1 Gbps SFP Port (1) 10/100/1000 Mbps RJ45 Port |
|
Power Method |
802.3af PoE: (Pins 1, 2+; 3, 6-) 24V Passive PoE: (Pins 4, 5+; 7, 8-) |
|
Power Supply |
802.3af PoE or 24V Passive PoE Device* |
|
Max. Power Consumption |
1.5W |
|
Supported Voltage Range |
16 to 57V |
|
LEDs |
(1) Ethernet (1) Optical Signal (1) Power |
|
Operating Temperature |
-40 to 60° C (-40 to 140° F) |
|
Operating Humidity |
10 to 90% Noncondensing |
|
ESD/EMP Protection |
± 12kV Contact/Air |
|
Certifications |
CE, FCC, IC |
* Power supply not included.