×

Click for
Table of Contents

menuUAP-Outdoor-5 Quick Start Guide

Package Contents

UniFi AP Outdoor 5
Antennas (Qty. 2)
Wall Mount Bracket
Metal Strap
Screws (Qty. 3)
Screw Anchors (Qty. 3)
PoE Adapter (24V, 1A) with Mount Bracket
Power Cord

Installation Requirements

System Requirements

Hardware Overview

LED

Ports

Secondary

The Secondary Ethernet port is a 10/100 Ethernet port used for bridging.

Main

This 10/100 Ethernet port is used to connect the power and should be connected to the LAN and DHCP server.

Reset

The Reset button serves two functions for the UniFi AP:

  • Restart Press and release the Reset button quickly.
  • Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.

Hardware Installation

The UniFi AP can be mounted to a wall or on a pole. Perform the steps for the appropriate installation:

Wall Mounting

Pole Mounting

Connecting Ethernet

Connecting Power

OR

Optional

Installer Compliance Responsibility

This device must be professionally installed and it is the professional installer’s responsibility to make sure the device is operated within local country regulatory requirements.

Antenna

Select your antenna from the list. Transmit output power is automatically adjusted to comply with the regulations of the applicable country. For a Custom antenna, Antenna Gain is entered manually. Note the requirements and antenna types listed below.

Certified Antenna Types

This radio transmitter FCC ID: SWX-M5 / IC ID: 6545A-M5 has been approved by FCC /ISED Canada to operate with the antenna types listed below with the maximum permissible gain for each antenna type indicated. Antenna types not included in this list or having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Antenna

Frequency

Gain

2 Omni

5 GHz

7 dBi

Specifications

UAP-Outdoor-5

Dimensions

170 x 80 x 30 mm

(6.69 x 3.15 x 1.18")

Weight

230 g (8.11 oz) without Antennas
294 g (9.67 oz) with Antennas

Networking Interface

(2) 10/100 Ethernet Ports

Buttons

Reset

Power Method

24V Passive Power over Ethernet

Power Supply

24V, 1A PoE Adapter (Included)

Supported Voltage Range

12VDC to 24VDC

Power Save

Supported

Max. Power Consumption

6.5W

Max. TX Power

27 dBm

Operating Frequency

5 GHz

Antennas

(2) External Omni Antennas

Antenna Gain

7 dBi

Wi-Fi Standards

802.11 a/n

Wireless Security

WEP, WPA-PSK, WPA-TKIP,
WPA2 AES, 802.11i

BSSID

Up to Four per Radio

Mounting

Wall/Pole (Kits Included)

Operating Temperature

-30 to 75° C (-22 to 167° F)

Operating Humidity

5 - 95% Noncondensing

Certifications

CE, FCC, IC