Package Contents

* Included only in the single-pack of the UAP-AC-M-PRO

Installation Requirements

• 13 mm wrench (for pole mounting)
• Drill and 8 mm drill bit (for wall mounting)
• Phillips screwdriver (for wall mounting)
• Cable feed must be pointed downwards when mounted.
• Shielded Category 5 (or above) cabling should be used for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE.

  We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable

• Surge protection should be used for all outdoor installations. We recommend that you use two Ethernet Surge Protectors, model ETH-SP, one near the UAP-AC-M-PRO and the other at the entry point to the building. The ETH-SP will absorb power surges and safely discharge them into the ground.

	IMPORTANT: The UAP-AC-M-PRO requires the UniFi Controller v5.4 or higher, available at: ui.com/download/unifi

System Requirements

• Linux, Mac OS X, or Microsoft Windows 7/8/10
• Java Runtime Environment 1.6 (1.8 or newer recommended)
• Web Browser: Google Chrome (Other browsers may have limited functionality)
• UniFi Controller software v5.4 or newer (available at: ui.com/download/unifi)

Wireless Adoption Requirements

The UAP-AC-M-PRO supports wireless adoption into your UniFi Wi-Fi network. This feature requires a currently managed UniFi AP operating with the following configuration:

• The UniFi AP must be running firmware 3.7.7 or newer
• At least one SSID enabled and operating on 5 GHz band
• The UAP-AC-M-PRO must be within wireless range of the UniFi AP

Hardware Overview

LED

Ports

Secondary
The Secondary port is a Gigabit Ethernet port used for bridging.
Reset
The Reset button serves two functions for the UniFi AP: Restart Press and release the Reset button quickly. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.
Main
The Main port is a Gigabit PoE port used to connect the power and should be connected to the LAN and DHCP server. Power can be provided by one of the following: Gigabit PoE Adapter (included) Ubiquiti UniFi Switch with PoE 802.3af/802.3at PoE+ compliant switch

Hardware Installation

The UAP-AC-M-PRO can be mounted on a pole or mast, or on a wall. Perform the steps for the appropriate installation.

Pole Mount

1. 

2. 

3. 

4. 

5. 

6. 

Wall Mount

	Note: Secure the Mounting Bracket directly to a stud or other structurally stable surface using appropriate fasteners.

1. 

2. 

3. 

	Note: Screws shown not included.

4. 

Connecting Ethernet

1. 

2. 

3. 

Connecting Power

OR

Wireless Adoption

See “Wireless Adoption Requirements” before proceeding.

1. Ensure the UAP-AC-M-PRO is powered on, and then launch the UniFi Controller software.
2. Go to the Devices page, and the UAP-AC-M-PRO will show up as Pending Approval (Wireless).
3. Click Adopt.

For information on configuring and using the UniFi Controller software, refer to the User Guide located on our website: ui.com/download/unifi

Specifications

UAP-AC-M-PRO
Dimensions	343.2 x 181.2 x 60.2 mm (13.51 x 7.13 x 2.37")
Weight	633 g (1.40 lb)
Networking Interface	(2) 10/100/1000 Ethernet Ports
Buttons	Reset
Power Method	802.3af PoE
Power Supply	48V, 0.5A PoE Gigabit Adapter (Included)
Supported Voltage Range	44VDC to 57VDC
Max. Power Consumption	9W
Operating Frequency	2.4 GHz 5 GHz
Max. TX Power 2.4 GHz 5 GHz	22 dBm 22 dBm
MIMO 2.4 GHz 5 GHz	3 x 3 3 x 3
Antennas	(3) Dual-Band Internal
Antenna Gain	8 dBi
Wi-Fi Standards	802.11 a/b/g/n/ac
Wireless Security	WEP, WPA-PSK, WPA Enterprise (WPA/WPA2, TKIP/AES)
BSSID	Up to Four per Radio
Mounting	Wall/Pole (Pole Kit Included)
Operating Temperature	-40 to 70° C (-40 to 158° F)
Operating Humidity	5 - 95% Noncondensing
Certifications	CE, FCC, IC