Package Contents
U‑Installer |
Carabiner |
Hardware Overview
Carabiner |
---|
Accessory for attaching the U-Installer to a belt (use is optional). To use, insert into the Clip Loop and attach to a belt loop or utility belt. |
Clip Loop |
Used to attach the Carabiner. |
Wi-Fi LED |
Lights blue if the U-Installer has a Wi-Fi connection to your mobile device. |
Battery LED |
Four blue LEDs indicate the internal battery’s charge level: |
Reset Ext Button |
To reset the device connected to the U-Installer to factory defaults, press this button while the device is powered on. Hold the button for more than eight seconds until the LEDs on the device flash. |
Power Button |
Press to power the U-Installer on or off. The Battery LEDs light when power is on. |
Reset Button |
To reset the U-Installer to factory defaults, press and hold the Reset button while the U-Installer is powered on until the LEDs on the device flash. |
USB-C Port |
When there is a low charge, recharge the internal battery by connecting a power source, such as a mobile battery pack, to the USB Type C port. |
PoE OUT Port |
Supplies 24V passive PoE to the device being installed. |
Configuring a CPE Device
Use a mobile device (default method) or a laptop to configure the CPE device at the point of installation via the U-Installer’s Wi-Fi:
You have two options for configuration: the UISP™ App and Web Portal.
UISP App - Default Method
- iOS devices only: Connect your mobile device’s Wi-Fi to the U-Installer SSID named: ubi:<MAC Address>
- Download and launch the UISP app on your mobile device.
- Connect to the CPE device:
- On the Connections screen, tap the CPE device.
- Tap Log in to automatically log into the device.
- Tap , and then tap Installer.
- The app will automatically detect and connect to the U-Installer SSID named: ubi:<MAC_Address>
- On the Discover screen, tap the CPE device to automatically log into the device.
- Follow the on-screen instructions.
iOS
Android
Web Portal
- Connect your device’s Wi-Fi to the U-Installer SSID named: ubi:<MAC_Address>
- Open a web browser and go to: https://192.168.1.20
- Select your Country and Language. You must agree to the Terms of Use to use the product. Click Continue.
- Create a username and password. Confirm your new password and then click Save.
- Configure the CPE device as needed.
Removing the U-Installer
After you have configured the CPE device, remove the U-Installer:
OR
Specifications
U-Installer |
|
Wi-Fi Frequency |
2.4 GHz |
---|---|
Max Transmit Power |
22 dBm |
Max Power Consumption |
|
U-Installer | 3W |
U-Installer with CPE | 15W |