×

Click for
Table of Contents

menuPS-5AC Quick Start Guide

Package Contents

PrismStation AC
GPS Antenna
Mounting Bracket
Pole Clamp
Carriage Bolts (Qty. 2)
Flange Nuts (Qty. 2)
Allen Wrench
Gigabit PoE (24V, 1A) with Mounting Bracket
Power Cord

Installation Requirements

* Shown with the Horn-5-45

Hardware Overview

Power LED

The LED will light blue when the device is connected to a power source.

Reset Button

To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the device is already powered on. Alternatively, the device may be reset remotely via a Reset button located on the bottom of the Gigabit PoE adapter.

GPS Antenna Connector

This is used to connect the included GPS Antenna.

Ethernet Port

This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server.

Release Button

To remove the attached horn antenna, rotate the horn antenna counterclockwise while depressing the Release Button.

Hardware Installation

These instructions show the Horn-5-45; however, the PrismStation is also compatible with the following antennas:

Pole-Mounting

Connecting Ethernet and GPS

Connecting Power

WARNING: The switch port must comply with the power specifications listed in this Quick Start Guide.

OR

Optional

Accessing airOS via Wi-Fi

Installer Compliance Responsibility

Devices must be professionally installed and it is the professional installer's responsibility to make sure the device is operated within local country regulatory requirements.

The Antenna and Output Power fields are provided to the professional installer to assist in meeting regulatory requirements.

Specifications

PS-5AC

Dimensions
 

  • Mounting Hardware Only

155 x 155 x 104 mm

(5.16 x 5.16 x 4.09")

83 x 117 x 69 mm

(3.27 x 4.61 x 2.72")

Weight

  • Mounting Hardware Only

0.77 kg (1.70 lb)

0.79 kg (1.74 lb)

Networking Interface

(1) 10/100/1000 Ethernet Port

RF Connector

(1) GPS

LED

Power

Max. Power Consumption

10W

Power Supply

24V, 1A Gigabit PoE Adapter (Included)

Power Method

24V Passive PoE (Pairs 4, 5+; 7, 8 Return)

Supported Voltage Range

20 to 26VDC

Wind Loading

31 N @ 200 km/h (7 lbf @ 125 mph)

Wind Survivability

200 km/h (125 mph)

Operating Temperature

-40 to 70° C (-40 to 158° F)

Operating Humidity

5 to 95% Noncondensing

Mounting

Pole-Mount (Kit Included)

ESD/EMP Protection

± 24kV Contact/Air

Certifications

CE, FCC, IC

Operating Frequency (MHz)

US/CA

U-NII-1

5150 - 5250

U-NII-2A

5250 - 5350

U-NII-2C

5470 - 5725

U-NII-3

5725 - 5850

Worldwide

5150 - 5875

Management Radio (MHz)

US/CA

2412 - 2462

Worldwide

2412 - 2472