Package Contents
![]() |
---|
Antenna Feed |
![]() |
---|
Center Reflector Panel |
![]() |
---|
Side Reflector Panels (Qty. 2) |
![]() |
---|
Mounting Bracket |
![]() |
---|
Feed Receiver |
![]() |
---|
Pivot Panels (Qty. 2) |
![]() |
---|
M4 SEM Screws (Qty. 8) |
![]() |
---|
M8 SEM Screws (Qty. 4) |
![]() |
---|
Metal Straps (Qty. 3) |
![]() |
---|
Gigabit PoE (24V, 0.3A) with Mounting Bracket |
![]() |
---|
Power Cord |
Installation Requirements
- Phillips screwdriver
- 13 mm wrench
- 7 mm socket wrench or screwdriver
- Shielded Category 5 (or above) cabling with drain wire should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable
- Surge protection should be used for all outdoor installations. We recommend that you use two Ethernet Surge Protectors, model ETH-SP, one near the LiteBeam and the other at the entry point to the building. The ETH-SP will absorb power surges and safely discharge them into the ground.
Application Examples
The LiteBeam AC mounted outdoors with the reflector installed provides directional outdoor coverage (gain reflector-dependent).
The LiteBeam AC mounted outdoors without the reflector installed provides outdoor-to-indoor coverage using the 3 dBi Antenna Feed only.
Hardware Overview
![]() Ethernet LED |
---|
The LED will light steady blue when an active Ethernet connection is made and flash when there is activity. |
![]() Power LED |
The LED will light blue when the device is connected to a power source. |
![]() Reset Button |
To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the LiteBeam AC is powered on. The LiteBeam AC may also be reset remotely using the auxiliary Reset button located on the bottom of the Gigabit PoE adapter. |
![]() Ethernet Port |
Supports 10/100/1000 connections and passive PoE. This port should be connected to the LAN and DHCP server. |
Hardware Installation
Pole Mounting
Connecting Power
WARNING: The switch port must comply with the power specifications listed in this Quick Start Guide. |
OR
Optional
Accessing airOS via Wi-Fi
Installer Compliance Responsibility
Devices must be professionally installed and it is the professional installer's responsibility to make sure the device is operated within local country regulatory requirements.
Antenna
Select your antenna from the list. If Calculate EIRP Limit is enabled, transmit output power is automatically adjusted to comply with the regulations of the applicable country. For a Custom antenna, Antenna Gain is entered manually. Note the requirements and antenna types listed below.
Cable Loss (When applicable)
Enter the cable loss in dB. Output power is adjusted to compensate for loss between the radio and the antenna.
Certified Antenna Types
This radio transmitter FCC ID: SWX-LBE5ACLR / IC: 6545A-LBE5ACLR has been approved by FCC / ISED Canada to operate with the antenna types listed below with the maximum permissible gain for each antenna type indicated. Antenna types not included in this list or having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Antenna |
Frequency |
Gain |
---|---|---|
Grid |
5 GHz |
26 dBi |
Specifications
LBE-5AC-LR |
|
Dimensions |
512.5 x 385.75 x 258.3 mm |
---|---|
Weight |
|
With Mount | 1.360 kg (2.998 lb) |
Without Mount | 1.735 kg (3.825 lb) |
Networking Interface |
(1) 10/100/1000 Ethernet Port |
Antenna Gain |
26 dBi |
Max. Power Output |
25 dBm |
Max. Power Consumption |
7W |
Power Supply |
24V, 0.3A Gigabit PoE Adapter |
Power Method |
Passive PoE (Pairs 4, 5+; 7, 8 Return) |
Operating Temperature |
-40 to 70° C |
Operating Humidity |
5 to 95% Noncondensing |
ESD/EMP Protection |
± 24 kV Contact / Air |
Shock and Vibration |
ETSI300-019-1.4 |
Wind Survivability |
200 km/h (125 mph) |
Wind Loading |
550 N @ 200 km/h |
Certifications |
CE, FCC, IC |
Operating Frequency (MHz) |
||||
Worldwide |
5150 - 5875 |
|||
---|---|---|---|---|
US/CA |
U-NII-1 |
5150 - 5250 |
||
U-NII-2A |
5250 - 5350 |
|||
U-NII-2C |
5470 - 5725 |
|||
U-NII-3 |
5725 - 5850 |
Management Radio (MHz) |
|
Worldwide |
2412 - 2472 |
---|---|
US/CA |
2412 - 2462 |