Package Contents
 |
|---|
| LiteAP |
 |
|---|
| Ball Joint Mount |
 |
|---|
| Metal Strap |
 |
|---|
| Set Screws (Qty. 2) |
 |
|---|
| Gigabit PoE (24V, 0.5A) with Mounting Bracket |
 |
|---|
| Power Cord |
Installation Requirements
- 7 mm socket wrench or screwdriver
- Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable
Hardware Overview
 Reset Button |
|---|
To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the LiteAP is powered on. Alternatively, the LiteAP may be reset remotely via a Reset button located on the bottom of the Gigabit PoE Adapter. |
 Power LED |
The Power LED will light blue when the device is connected to a power source. |
 Ethernet LED |
The Ethernet LED will light steady blue when an active Ethernet connection is made and flash when there is activity. |
 Ethernet Port |
The Gigabit Ethernet port is used to connect the power and should be connected to the LAN. |
Hardware Installation
Connecting Power
- Connect the power using:
- included Gigabit PoE Adapter
- PoE switch
|
WARNING: The switch port must comply with the power specifications listed in this Quick Start Guide. |
|---|
Accessing airOS
Installer Compliance Responsibility
Devices must be professionally installed and it is the professional installer's responsibility to make sure the device is operated within local country regulatory requirements.
The Output Power field is provided to the professional installer to assist in meeting regulatory requirements.
Specifications
|
LAP-120 |
|
|
Dimensions (Mount Not Included) |
452.3 x 78.7 x 54.4 mm |
|---|---|
|
Weight (Mount Not Included) |
420 g |
|
Networking Interface |
(1) 10/100/1000 Ethernet Port |
|
Antenna Gain |
16 dBi |
|
Power Supply |
24V, 0.5A Gigabit PoE Adapter (Included) |
|
Power Method |
Passive PoE (Pairs 4, 5+; 7, 8 Return) |
|
Supported Voltage Range |
20 - 26VDC |
|
ESD/EMP Protection |
± 24kV Contact / Air |
|
Shock and Vibrations |
ETSI300-019-1.4 |
|
Wind Survivability |
200 km/h (125 mph) |
|
Wind Loading |
77 N @ 200 km/h |
|
Operating Temperature |
-40 to 70° C |
|
Operating Humidity |
5 to 95% Noncondensing |
|
Certifications |
CE, FCC, IC |
|
Operating Frequency (MHz) |
||
|
US/CA |
U-NII-1 |
5150 - 5250 |
|---|---|---|
|
U-NII-2A |
5250 - 5350 |
|
|
U-NII-2C |
5470 - 5725 |
|
|
U-NII-3 |
5725 - 5850 |
|
|
Worldwide |
5150 - 5875 |
|