×

Click for
Table of Contents

menuAP-5AC-90-HD Quick Start Guide

Package Contents

airPrism Antenna
Protective Shrouds (Qty. 3)
U-Brackets (Qty. 2)
Pole Brackets (Qty. 2)
Pole Clamps (Qty. 2)
Carriage Bolts (Qty. 4)
Hex Bolts with Washers (Qty. 8)
Serrated Flange Nuts (Qty. 4)
Hex Nuts (Qty. 4)

Beamwidth

The airPrism® antenna works with the Rocket®5ac Prism radios for Point-to-MultiPoint (PtMP) links. Each Rocket radio independently transmits and receives and corresponds with a specific color-coded 30° beamwidth:

Top Rocket

Middle Rocket

Bottom Rocket

Channel Offset

The following table describes how much offset is needed with the channels used by the Rocket5ac Prism radios:

Channel Width

Separation

10 MHz

20 MHz

20 MHz

30 MHz

30 MHz

50 MHz

40 MHz

60 MHz

Installation Requirements

Hardware Installation

Note: Repeat steps 1-6 for each Rocket.

  1. Note: Orient both U-Brackets as shown.

  2. Note: Hand-tighten the bolts.

  3. Note: The antenna has an electrical downtilt of 2°.

  4. Note: The brackets may slide along the pole, depending on the angle of the elevation tilt.

Specifications

AP-5AC-90-HD

Dimensions

(Mount Included)

322.6 x 201.5 x 1300 mm

(12.7 x 7.93 x 51.18")

Weight

(Mount Included)

13.1 kg

(28.9 lb)

Frequency Range

5.15 - 5.85 GHz

Gain

22 dBi

HPOL Beamwidth

3 x 30° (6 dB)

VPOL Beamwidth

3 x 30° (6 dB)

Elevation Beamwidth

Electrical Downtilt

Polarization

Dual-Linear

Max. VSWR

1.75:1

Wind Survivability

200 km/h (125 mph)

Wind Loading

534 N @ 200 km/h (120 lbf @ 125 mph)

Interfaces

(6) RP-SMA Connectors (Weatherproof)

Compatible Radio

Rocket5ac Prism

Mounting

Pole Mount (Kit Included)

ETSI Specification

EN 302 326 DN2

Certifications

CE, FCC, IC