×

Click for
Table of Contents

menuAM-V2G-Ti Quick Start Guide

Package Contents

Antenna
Protective Shroud
U-Brackets (Qty. 2)
Pole Brackets (Qty. 2)
Pole Clamps (Qty. 2)
Carriage Bolts (Qty. 4)
Serrated Flange Bolts (Qty. 4)
Serrated Flange Nuts (Qty. 8)
RF Cables (Qty. 2)

Installation Requirements

Before You Begin

  1. Loosen the four hex head screws, but do not remove the screws.
  2. Carefully move the Beamwidth Deflectors to the desired angle, as indicated by the screw slots.
  3. 120° Beamwidth

    90° Beamwidth

    60° Beamwidth

    Important: Both deflectors must be set to the same angle.

  4. Tighten the four hex head screws.

Hardware Installation

  1. Note: Orient both U-Brackets as shown.

  2. Note: Hand-tighten the bolts.

  3. Note: The antenna has an electrical downtilt of 4°.

  4. Note: The brackets may slide along the pole, depending on the angle of the elevation tilt.

Specifications

AM-V2G-Ti

Dimensions

773 x 372 x 120 mm (30.43 x 14.65 x 4.72")

Weight (with Brackets)

6.40 kg (14.11 lb)

Frequency Range

2.3-2.6 GHz

Beamwidth Angles

60°/ 90°/ 120°

Gain

(Beamwidth Dependent)

17 dBi @ 60°

16 dBi @ 90°

15 dBi @ 120°

Electrical Downtilt

Wind Survivability

200 km/h (125 mph)

Wind Loading

640.5 N@ 200 km/h (144 lbf @ 125 mph)

Polarization

Dual Linear

Cross-Pol Isolation

25 dB Typical

F/B Ratio

30 dB Typical

Max. VSWR

1.5:1

RF Connectors

2 RP-SMA Connectors (Weatherproof)

Compatible Radios

RocketM2 Titanium

RocketM2

Mounting

Pole Mount (Kit Included)

ETSI Specification

EN 302 326 DN2

Certifications

CE, FCC, IC