Package Contents

Installation Requirements

• 5 GHz airFiber radio (sold separately)
• 13 mm wrench

Other Requirements

• Clear line of sight between airFiber radios
• Clear view of the sky for proper GPS operation
• Vertical mounting orientation
• Mounting point:
  • At least 1 m below the highest point on the structure
  • For tower installations, at least 3 m below the top of the tower
• Ground wires – min. 10 AWG (5 mm2) and max. length: 1 m. As a safety precaution, ground the airFiber radio to grounded masts, poles, towers, or grounding bars.

	WARNING: Failure to properly ground your airFiber radio will void your warranty.

• (Recommended) 2 Outdoor Gigabit PoE surge protectors

	Note: For guidelines about grounding and lightning protection, follow your local electrical regulatory codes.

• Outdoor, shielded Category 6 (or above) cabling and shielded RJ-45 connectors are required for all wired Ethernet connections.

Hardware Installation

	IMPORTANT: Handle the antenna with care. Deformations in its reflector may reduce the antenna’s effectiveness.

1. 

2. 

3. 

	Note: The GPS antenna is included with the airFiber radio.

4. 

5. 

6. 

7. 

8. 

Aligning the Antenna

Optimize the airFiber link by adjusting one end of the link at a time. Refer to the airFiber X radio Quick Start Guide for additional details.

	Note: Repeat steps 1 and 2 as needed to optimize the link.

1. 

2. 

3. 

4. 

5. 

6. 

Specifications

AF-5G23-S45
Dimensions	378 x 378 x 290 mm (14.88 x 14.88 x 11.42")
Weight	3.4 kg (7.5 lb) (Mount Included)
Frequency	5.1 - 5.9 GHz
Gain	23 dBi
Max. VSWR	1.5:1
Wind Survivability	200 km/h (125 mph)
Wind Loading	190 N @ 200 km/h (43 lbf @ 125 mph)
Polarization	Dual Linear
F/B Ratio	33 dB
ETSI Specification	EN 302 326 DN2
Mounting	Universal Pole Mount for Ø 38 - 64 mm (Ø 1.5 - 2.5") Poles