EdgePower 24V-72W/54V-72W Changelog =========================================================================== 1.11.0 Changelog / Mar 21, 2023: ==== - added support for events notifications - improved battery charging error detection - static DNS servers are now prioritized - disable the battery charger if overloaded - do not reconnect DC output after battery Low Voltage issue until AC is connected back - support for DNS servers in SLAAC - improved UISP Application support Checksums: File | EPX.v1.11.0.c3a3c3.230321.1004.bin MD5 | 986e4ac270057eb330c753ba0ffb7be2 SHA256 | 43c3c8a91b67cd57ddde42ffe81c216ed109c82ff8ba4a1faef54c7e2126e19d 1.10.0 Changelog / May 24, 2022: ==== - fixed bug when DC output may be temporarily lost when AC is disconnected/reconnected - fixed bug when new battery may be detected as bad in some cases - improved calibration process - power outage data are now used for battery calibration - added ability to turn-off DC output - security fixes and improvements - filter interfaces in SNMP - improved support file 1.9.0 Changelog / May 28, 2021: ==== - fixed bug when remaining time calculation may be wrong for some batteries - improved faulty battery detection - improved battery capacity detection - NTP client is now enabled by default - improved deep calibration precision - One-time deep calibration to 30% - if needed - battery Voltage is now used to estimate battery capacity when the charger is disabled - fixed bug when Remote syslog settings doesn't work after factory reset - fixed incorrect timezone in UI after factory reset - fixed AC detection on faulty devices - fixed data types in SNMP response - fixed false battery unplug detection when AC is lost (in some situations) - changed limits for battery capacity warnings (limits are now lower) - changed calibration periods, calibration every 3 weeks, deep every 5th calibration 1.8.1 Changelog / Dec 4, 2020: ==== - changed algorithm for fast calibration, calibration process is extended to 2-weaks period now Note that calibration data will be reset during upgrade - improved charging process on big batteries - improved adjusting measured capacity according to discharge current - fixed bug when WebUI was not reachable on IPv6 - fixed memory leak when DNS server is unreachable - various fixes/improvements for UNMS 1.8.0 Changelog / Oct 2, 2020: ==== - added ability to set SNMP Location and Contact in Settings page - various WebUI fixes/improvments 1.8.0-beta1 Changelog / Sept 4, 2020: ==== - introducing new WebUi with new Battery status graph: Graph shows battery charge in last 24 hours, outages, charging and calibrating process if occurs - improved ping watchdog: allows set watchdog timeout from 1 minute to 1 hour - improved battery calibration process 1.7.0 Changelog / May 15, 2020: ==== - Fixed bug where WebUI stops working if port is changed to 81 - Added detailed error message when automatic update check fails - Introduced new SNMP battery fields: PsuBatteryChargeLevel, PsuBatteryTimeRemining, PsuBatteryReplaceIndicator, PsuBatteryLastReplaceDate (for more information see attached ubnt-mib) - Optimized charging time for bad batteries - Updates and fixes for better use with UNMS 1.6.0 Changelog / Jan 28, 2020: ==== - Changed behavior of Charging - Adaptive fast Charging is now automatically enabled when battery capacity allows it. - added Locate function in System > Device Maintenance tab. Allows to locate device by blinking LED. - added warning when default password is used - added support for reporting crashes. Option can be disabled in System > Device. - Updated self-signed HTTPS certificate generation rules to match macOS v10.15 and iOS v13 requirements. - fixed "battery voltage low warning" which was shown even if battery is not connected - fixed bug when Reset battery status doesn't reset currently running/planned calibration - fixed Total power consumption when in some cases was counted inaccurate. - fixed bug when User was immediately logged out when Web Server Session timeout field is set to 0 - fixed bug when default route was not set after reboot in some cases. - various WebUI fixes - various fixes/improvements for UNMS 1.5.0 Changelog / Sept 24, 2019: ==== - added automatic check of new firmware availability in UI - fixed bug when hosname in UNMS key wasn't sometimes resolved by DNS - added support for UNMS Mobile apps. - various fixes/improvements for UNMS 1.4.0 Changelog / Jun 19, 2019: ==== - Added expected time on battery and battery capacity percentage. - Added battery calibration - Automatically starts within one hour after midnight if the battery is fully charged. Counts the battery capacity and detects if battery is healthy. The calibration is periodically started each 90 days the deep calibration (battery is discharged to 40%) and each 7 days the fast (to 70%). Proper timezone and time set is needed to avoid calibration in main time. - Added new state - Replace battery (when the corrupted battery is detected) - Added battery capacity and installation date fields into Power tab - Added 'Reset battery status' into Power tab - Useful, when new battery is installed to force new battery calibration. 1.3.1 Changelog / Feb 25, 2019: ==== - Introduced new Dashboard - Added support for Management VLAN setting - Added support for Backup/Restore configuration - Added Overloaded state - If actual power is higher than max power for 60s, disconnects outputs and after 10s tries to reconnect them agian. - Added support for reset total power consumption - Fixed bug when Total power consumption was not reset during factory-reset - Improved Adaptive fast charging stability - Improved behavior when DHCP is used to get IP address and device is reconnected to other newtork (Device now tries to renew IP address) - Improved UNMS support 1.2.0 Changelog / Jul 13, 2018: ==== - Added state to dashboard. - Added low battery status when battery charge is arround 10% - Added low voltage disconnect when battery voltage is 11.8V (shows Power OFF status). - Improved Boost function, now named Adaptive Fast Charging (Automatically raises maximum charging current from 1A to 2A when power consumption allows it.) - Added Time zone selection - Enabled IPv6 Link Local - Updated discovery lib - Fixed bug when SSH Keys can not be added - Fixed bug when PoE on Port2 was not restored after AC outage - Fixed LED behavior when booting/connecting to UNMS