UBNT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Counter64, IpAddress, TimeTicks, enterprises FROM SNMPv2-SMI DisplayString, TruthValue, MacAddress FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF; -- ubntAirosGroups, ubntMIB FROM UBNT-MIB; ubntMIB MODULE-IDENTITY LAST-UPDATED "201408150000Z" ORGANIZATION "Ubiquiti Networks, Inc." CONTACT-INFO "support@ubnt.com" DESCRIPTION "The MIB module for Ubiquiti Networks, Inc. entities" REVISION "201408150000Z" DESCRIPTION "AF.v2.2 revision" ::= { ubnt 1 } -- -------------------------------------------------------------------------------- -- Ubiquiti Networks Root -- -------------------------------------------------------------------------------- ubnt OBJECT IDENTIFIER ::= { enterprises 41112 } -- -------------------------------------------------------------------------------- -- Ubiquiti Networks SNMP Information -- -------------------------------------------------------------------------------- ubntSnmpInfo OBJECT IDENTIFIER ::= { ubntMIB 2 } ubntSnmpGroups OBJECT IDENTIFIER ::= { ubntSnmpInfo 1} ubntAirosGroups OBJECT IDENTIFIER ::= { ubntSnmpInfo 2} ubntAirFiberGroups OBJECT IDENTIFIER ::= { ubntSnmpInfo 3} ubntEdgeMaxGroups OBJECT IDENTIFIER ::= { ubntSnmpInfo 4} ubntUniFiGroups OBJECT IDENTIFIER ::= { ubntSnmpInfo 5} ubntAirVisionGroups OBJECT IDENTIFIER ::= { ubntSnmpInfo 6} ubntMFiGroups OBJECT IDENTIFIER ::= { ubntSnmpInfo 7} ubntUniTelGroups OBJECT IDENTIFIER ::= { ubntSnmpInfo 8} -- -------------------------------------------------------------------------------- -- Ubiquiti Networks Products -- -------------------------------------------------------------------------------- ubntAirFIBER OBJECT IDENTIFIER ::= { ubntMIB 3 } ubntAirMAX OBJECT IDENTIFIER ::= { ubntMIB 4 } ubntEdgeMax OBJECT IDENTIFIER ::= { ubntMIB 5 } ubntUniFi OBJECT IDENTIFIER ::= { ubntMIB 6 } ubntAirVision OBJECT IDENTIFIER ::= { ubntMIB 7 } ubntMFi OBJECT IDENTIFIER ::= { ubntMIB 8 } ubntUniTel OBJECT IDENTIFIER ::= { ubntMIB 9 } -- -------------------------------------------------------------------------------- -- Ubiquiti Networks OR table -- -------------------------------------------------------------------------------- ubntORTable OBJECT-TYPE SYNTAX SEQUENCE OF UbntOREntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Capabilities" ::= { ubntMIB 1 } ubntOREntry OBJECT-TYPE SYNTAX UbntOREntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ubntORTable" INDEX { ubntORIndex } ::= { ubntORTable 1 } UbntOREntry ::= SEQUENCE { ubntORIndex Integer32, ubntORID OBJECT IDENTIFIER, ubntORDescr DisplayString } ubntORIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the ubntORTable" ::= { ubntOREntry 1 } ubntORID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "OR ID" ::= { ubntOREntry 2 } ubntORDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description of idenfifier" ::= { ubntOREntry 3 } ubntORInfoGroup OBJECT-GROUP OBJECTS { ubntORID, ubntORDescr } STATUS current DESCRIPTION "Collection of related objects" ::= { ubntSnmpGroups 1 } ubntAirFIBER OBJECT IDENTIFIER ::= { ubntMIB 3 } -- -------------------------------------------------------------------------------- -- AirFiber Config Table -- -------------------------------------------------------------------------------- airFiberConfig OBJECT-TYPE SYNTAX SEQUENCE OF AirFiberConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "AirFiber Configuration Group" ::= { ubntAirFIBER 1 } airFiberConfigEntry OBJECT-TYPE SYNTAX AirFiberConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the airFiberConfig Table" INDEX { airFiberConfigIndex } ::= { airFiberConfig 1 } AirFiberConfigEntry ::= SEQUENCE { airFiberConfigIndex Integer32, radioEnable INTEGER, radioLinkMode INTEGER, radioDuplex INTEGER, txFrequency Integer32, rxFrequency Integer32, regDomain DisplayString, gpsSync INTEGER, txPower Integer32, rxGain INTEGER, maxTxModRate INTEGER, modRateControl INTEGER, ethDPortLinkSpeed INTEGER, linkName DisplayString, encryptKey DisplayString, ethFlowControl INTEGER, ethMcastFilter INTEGER, ethTrackRFLink INTEGER, ethLinkOffDuration Integer32, ethLinkOffSpacing Integer32, txFrequency1 Integer32, rxFrequency1 Integer32, txFrequency2 Integer32, rxFrequency2 Integer32, txFrequency3 Integer32, rxFrequency3 Integer32, channelWidth Integer32, txChannelWidth Integer32, rxChannelWidth Integer32 } airFiberConfigIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the airFiberConfig" ::= { airFiberConfigEntry 1 } radioEnable OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Enabled State (Enabled/Disabled)" ::= { airFiberConfigEntry 2 } radioLinkMode OBJECT-TYPE SYNTAX INTEGER { master (1), slave (2), spectral (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Operating Mode" ::= { airFiberConfigEntry 3 } radioDuplex OBJECT-TYPE SYNTAX INTEGER { halfDuplex (1), fullDuplex (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Duplex Mode" ::= { airFiberConfigEntry 4 } txFrequency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX Operating frequency (MHz)" ::= { airFiberConfigEntry 5 } rxFrequency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RX Operating frequency (MHz)" ::= { airFiberConfigEntry 6 } regDomain OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Regulatory Domain" ::= { airFiberConfigEntry 7 } gpsSync OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "GPS Synchronization state (OFF, ON)" ::= { airFiberConfigEntry 8 } txPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Transmit Power Setting (dBm)" ::= { airFiberConfigEntry 9 } rxGain OBJECT-TYPE SYNTAX INTEGER { low (1), high (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Receiver Gain Setting" ::= { airFiberConfigEntry 10 } maxTxModRate OBJECT-TYPE SYNTAX INTEGER { qPSK-SISO-1-4x (0), qPSK-SISO-1x (1), qPSK-MIMO-2x (2), qAM16-MIMO-4x (4), qAM64-MIMO-6x (6), qAM256-MIMO-8x (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum TX Modulation Rate" ::= { airFiberConfigEntry 11 } modRateControl OBJECT-TYPE SYNTAX INTEGER { manual (1), automatic (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit Modulation Rate Control" ::= { airFiberConfigEntry 12 } ethDPortLinkSpeed OBJECT-TYPE SYNTAX INTEGER { auto (1), half-10Mbps (2), half-100Mbps (3), full-10Mbps (4), full-100Mbps (5), full-1000Mbps (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Data Port Configuration" ::= { airFiberConfigEntry 13 } linkName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Link Name" ::= { airFiberConfigEntry 14 } encryptKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Radio Link Encryption Key" ::= { airFiberConfigEntry 15 } ethFlowControl OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet DATA port Flow Control (OFF, ON)" ::= { airFiberConfigEntry 16 } ethMcastFilter OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet DATA port Multicast Filter. Enabling Filter prevents all multicast packets from reaching the CPU." ::= { airFiberConfigEntry 17 } ethTrackRFLink OBJECT-TYPE SYNTAX INTEGER { disabled (0), use-Timers (1), enabled (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable Ethernet DATA port state to track RF Link. Enabled forces DATA port to follow RF Link State. Use-Timers drops Data Port for timeout period" ::= { airFiberConfigEntry 18 } ethLinkOffDuration OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration (seconds) of Ethernet Link Drop when ethTrackRFLink is set to Use-Timers" ::= { airFiberConfigEntry 19 } ethLinkOffSpacing OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Spacing (seconds) of consecutive Etherenet Link Drops when ethTrackLink is set to Use-Timers" ::= { airFiberConfigEntry 20 } txFrequency1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "First configured TX Frequency (MHz) of radio." ::= { airFiberConfigEntry 21 } rxFrequency1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "First configured RX Frequency (MHz) of radio." ::= { airFiberConfigEntry 22 } txFrequency2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Second configured TX Frequency (MHz) of radio. 5 GHz radios only." ::= { airFiberConfigEntry 23 } rxFrequency2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Second configured RX Frequency (MHz) of radio. 5 GHz radios only." ::= { airFiberConfigEntry 24 } txFrequency3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Third configured TX Frequency (MHz) of radio. 5 GHz radios only." ::= { airFiberConfigEntry 25 } rxFrequency3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Third configured RX Frequency (MHz) of radio. 5 GHz radios only." ::= { airFiberConfigEntry 26 } channelWidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Current RF Channel Bandwidth. 5 GHz radios only." ::= { airFiberConfigEntry 27 } txChannelWidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current TX RF Channel Bandwidth (MHz). 5 GHz radios only." ::= { airFiberConfigEntry 28 } rxChannelWidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current RX RF Channel Bandwidth (MHz). 5 GHz radios only." ::= { airFiberConfigEntry 29 } -- -------------------------------------------------------------------------------- -- AirFiber Status Table -- -------------------------------------------------------------------------------- airFiberStatus OBJECT-TYPE SYNTAX SEQUENCE OF AirFiberStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "AirFiber Status Group" ::= { ubntAirFIBER 2 } airFiberStatusEntry OBJECT-TYPE SYNTAX AirFiberStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the airFiberStatus Table" INDEX { airFiberStatusIndex } ::= { airFiberStatus 1 } AirFiberStatusEntry ::= SEQUENCE { airFiberStatusIndex Integer32, curTXModRate INTEGER, radioLinkDistFt Integer32, radioLinkDistM Integer32, rxCapacity Integer32, txCapacity Integer32, radio0TempF Integer32, radio0TempC Integer32, radio1TempF Integer32, radio1TempC Integer32, rxPower0 Integer32, rxPower0Valid TruthValue, rxOverload0 TruthValue, rxPower1 Integer32, rxPower1Valid TruthValue, rxOverload1 TruthValue, remoteTXPower Integer32, remoteTXModRate INTEGER, remoteRXPower0 Integer32, remoteRXPower0Valid TruthValue, remoteRXPower0Overload TruthValue, remoteRXPower1 Integer32, remoteRXPower1Valid TruthValue, remoteRXPower1Overload TruthValue, countryCode Integer32, radioLinkState INTEGER, ethDataPortState INTEGER, gpsPulse DisplayString, gpsFix DisplayString, gpsLat DisplayString, gpsLong DisplayString, gpsAltMeters DisplayString, gpsAltFeet DisplayString, gpsSatsVisible Integer32, gpsSatsTracked Integer32, gpsHDOP OCTET STRING, dfsState DisplayString, upTime Integer32, dateTime DisplayString, fwVersion DisplayString, remoteRXGain DisplayString, radioLinkInfo DisplayString, ethDataPortInfo DisplayString, linkUpTime Integer32, remoteMAC DisplayString, remoteIP DisplayString, dfsDetections Integer32, dfsDomain DisplayString, dfsStateTxFreq1 DisplayString, dfsStateTxFreq2 DisplayString, dfsStateTxFreq3 DisplayString, dfsTimerTxFreq1 Integer32, dfsTimerTxFreq2 Integer32, dfsTimerTxFreq3 Integer32 } airFiberStatusIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the air0 interface" ::= { airFiberStatusEntry 1 } curTXModRate OBJECT-TYPE SYNTAX INTEGER { qPSK-SISO-1-4x (0), qPSK-SISO-1x (1), qPSK-MIMO-2x (2), qAM16-MIMO-4x (4), qAM64-MIMO-6x (6), qAM256-MIMO-8x (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current Transmit Modulation Rate" ::= { airFiberStatusEntry 2 } radioLinkDistFt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Link Distance (Feet)" ::= { airFiberStatusEntry 3 } radioLinkDistM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Link Distance (Meters)" ::= { airFiberStatusEntry 4 } rxCapacity OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Receive Throughput Capacity (bits/sec)" ::= { airFiberStatusEntry 5 } txCapacity OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Transmit Throughput Capacity (bits/sec)" ::= { airFiberStatusEntry 6 } radio0TempF OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Chain 0 DAC Temperature (F)" ::= { airFiberStatusEntry 7 } radio0TempC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Chain 0 DAC Temperature (C)" ::= { airFiberStatusEntry 8 } radio1TempF OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Chain 1 DAC Temperature (F)" ::= { airFiberStatusEntry 9 } radio1TempC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Chain 0 DAC Temperature (C)" ::= { airFiberStatusEntry 10 } rxPower0 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Chain 0 RX Power Level (dBm)" ::= { airFiberStatusEntry 11 } rxPower0Valid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Chain 0 RX Power Valid" ::= { airFiberStatusEntry 12 } rxOverload0 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Chain 0 RX Overloaded" ::= { airFiberStatusEntry 13 } rxPower1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Chain 1 RX Power Level (dBm)" ::= { airFiberStatusEntry 14 } rxPower1Valid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Chain 1 RX Power Valid" ::= { airFiberStatusEntry 15 } rxOverload1 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Chain 1 RX Overloaded" ::= { airFiberStatusEntry 16 } remoteTXPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remote Radio Transmit Power Level (dBm)" ::= { airFiberStatusEntry 17 } remoteTXModRate OBJECT-TYPE SYNTAX INTEGER { qPSK-SISO-1-4x (0), qPSK-SISO-1x (1), qPSK-MIMO-2x (2), qAM16-MIMO-4x (4), qAM64-MIMO-6x (6), qAM256-MIMO-8x (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Remote Transmit Modulation Rate" ::= { airFiberStatusEntry 18 } remoteRXPower0 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remote Radio Chain 0 RX Power Level (dBm)" ::= { airFiberStatusEntry 19 } remoteRXPower0Valid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Remote Radio Chain 0 RX Power Valid" ::= { airFiberStatusEntry 20 } remoteRXPower0Overload OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Remote Radio Chain 0 RX Overloaded" ::= { airFiberStatusEntry 21 } remoteRXPower1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remote Radio Chain 1 RX Power Level (dBm)" ::= { airFiberStatusEntry 22 } remoteRXPower1Valid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Remote Radio Chain 1 RX Power Valid" ::= { airFiberStatusEntry 23 } remoteRXPower1Overload OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Remote Radio Chain 1 RX Overloaded" ::= { airFiberStatusEntry 24 } countryCode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Country Code" ::= { airFiberStatusEntry 25 } radioLinkState OBJECT-TYPE SYNTAX INTEGER { down (0), up (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Link State" ::= { airFiberStatusEntry 26 } ethDataPortState OBJECT-TYPE SYNTAX INTEGER { down (0), up (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Data Port State" ::= { airFiberStatusEntry 27 } gpsPulse OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS Pulse Detected" ::= { airFiberStatusEntry 28 } gpsFix OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS Fix Obtained" ::= { airFiberStatusEntry 29 } gpsLat OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS Latitude" ::= { airFiberStatusEntry 30 } gpsLong OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS Longitude" ::= { airFiberStatusEntry 31 } gpsAltMeters OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS Altitude (m)" ::= { airFiberStatusEntry 32 } gpsAltFeet OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS Altitude (ft)" ::= { airFiberStatusEntry 33 } gpsSatsVisible OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "GPS Satellites Visible" ::= { airFiberStatusEntry 34 } gpsSatsTracked OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "GPS Satellites Tracked" ::= { airFiberStatusEntry 35 } gpsHDOP OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "GPS Horizontal Dilution of Precision" ::= { airFiberStatusEntry 36 } dfsState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Radio DFS State" ::= { airFiberStatusEntry 37 } upTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Board uptime (seconds)" ::= { airFiberStatusEntry 38 } dateTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Board date and time" ::= { airFiberStatusEntry 39 } fwVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Board Firmware Revision" ::= { airFiberStatusEntry 40 } remoteRXGain OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Remote radio Receiver Gain" ::= { airFiberStatusEntry 41 } radioLinkInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Link Connection Information" ::= { airFiberStatusEntry 42 } ethDataPortInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Data Port Link Connection Speed" ::= { airFiberStatusEntry 43 } linkUpTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Link uptime (seconds)" ::= { airFiberStatusEntry 44 } remoteMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Remote radio MAC Address" ::= { airFiberStatusEntry 45 } remoteIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Remote radio IP Address" ::= { airFiberStatusEntry 46 } dfsDetections OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of DFS Detections since boot. 5 GHz radios only." ::= { airFiberStatusEntry 47 } dfsDomain OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "DFS Regulatory Domain for current TX Frequency. 5 GHz radios only." ::= { airFiberStatusEntry 48 } dfsStateTxFreq1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "State of first TX Frequency. 5 GHz radios only." ::= { airFiberStatusEntry 49 } dfsStateTxFreq2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "State of second TX Frequency. 5 GHz radios only." ::= { airFiberStatusEntry 50 } dfsStateTxFreq3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "State of third TX Frequency. 5 GHz radios only." ::= { airFiberStatusEntry 51 } dfsTimerTxFreq1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Seconds remaining before first TX Frequency can advance to next operating state. Channel availability check timeout is 60 seconds and DFS detection timeout is 30 minutes. 5 GHz radios only." ::= { airFiberStatusEntry 52 } dfsTimerTxFreq2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Seconds remaining before second TX Frequency can advance to next operating state. Channel availability check timeout is 60 seconds and DFS detection timeout is 30 minutes. 5 GHz radios only." ::= { airFiberStatusEntry 53 } dfsTimerTxFreq3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Seconds remaining before third TX Frequency can advance to next operating state. Channel availability check timeout is 60 seconds and DFS detection timeout is 30 minutes. 5 GHz radios only." ::= { airFiberStatusEntry 54 } -- -------------------------------------------------------------------------------- -- AirFiber Statistics Table -- -------------------------------------------------------------------------------- airFiberStatistics OBJECT-TYPE SYNTAX SEQUENCE OF AirFiberStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "AirFiber Statistics" ::= { ubntAirFIBER 3 } airFiberStatisticsEntry OBJECT-TYPE SYNTAX AirFiberStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the AirFiberStatisticsTable" INDEX { airFiberStatisticsIndex } ::= { airFiberStatistics 1 } AirFiberStatisticsEntry ::= SEQUENCE { airFiberStatisticsIndex Integer32, txFramesOK Counter64, rxFramesOK Counter64, rxFrameCrcErr Counter64, rxAlignErr Counter64, txOctetsOK Counter64, rxOctetsOK Counter64, txPauseFrames Counter64, rxPauseFrames Counter64, rxErroredFrames Counter64, txErroredFrames Counter64, rxValidUnicastFrames Counter64, rxValidMulticastFrames Counter64, rxValidBroadcastFrames Counter64, txValidUnicastFrames Counter64, txValidMulticastFrames Counter64, txValidBroadcastFrames Counter64, rxDroppedMacErrFrames Counter64, rxTotalOctets Counter64, rxTotalFrames Counter64, rxLess64ByteFrames Counter64, rxOverLengthFrames Counter64, rx64BytePackets Counter64, rx65-127BytePackets Counter64, rx128-255BytePackets Counter64, rx256-511BytePackets Counter64, rx512-1023BytePackets Counter64, rx1024-1518BytesPackets Counter64, rx1519PlusBytePackets Counter64, rxTooLongFrameCrcErr Counter64, rxTooShortFrameCrcErr Counter64, txqosoct0 Counter64, txqosoct1 Counter64, txqosoct2 Counter64, txqosoct3 Counter64, txqosoct4 Counter64, txqosoct5 Counter64, txqosoct6 Counter64, txqosoct7 Counter64, txqospkt0 Counter64, txqospkt1 Counter64, txqospkt2 Counter64, txqospkt3 Counter64, txqospkt4 Counter64, txqospkt5 Counter64, txqospkt6 Counter64, txqospkt7 Counter64, rxqosoct0 Counter64, rxqosoct1 Counter64, rxqosoct2 Counter64, rxqosoct3 Counter64, rxqosoct4 Counter64, rxqosoct5 Counter64, rxqosoct6 Counter64, rxqosoct7 Counter64, rxqospkt0 Counter64, rxqospkt1 Counter64, rxqospkt2 Counter64, rxqospkt3 Counter64, rxqospkt4 Counter64, rxqospkt5 Counter64, rxqospkt6 Counter64, rxqospkt7 Counter64, txoctetsAll Counter64, txpktsAll Counter64, rxoctetsAll Counter64, rxpktsAll Counter64 } airFiberStatisticsIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the airFiberStatus" ::= { airFiberStatisticsEntry 1 } txFramesOK OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port TX Frames" ::= { airFiberStatisticsEntry 2 } rxFramesOK OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port RX Frames" ::= { airFiberStatisticsEntry 3 } rxFrameCrcErr OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port CRC Errors" ::= { airFiberStatisticsEntry 4 } rxAlignErr OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Receive Alignment Errors" ::= { airFiberStatisticsEntry 5 } txOctetsOK OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port TX Octets" ::= { airFiberStatisticsEntry 6 } rxOctetsOK OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port RX Octets" ::= { airFiberStatisticsEntry 7 } txPauseFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Pause Frames Transmitted" ::= { airFiberStatisticsEntry 8 } rxPauseFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Pause Frames Received" ::= { airFiberStatisticsEntry 9 } rxErroredFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Bad Frames Received" ::= { airFiberStatisticsEntry 10 } txErroredFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Bad Frames Transmitted" ::= { airFiberStatisticsEntry 11 } rxValidUnicastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Unicast Frames Received" ::= { airFiberStatisticsEntry 12 } rxValidMulticastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Multicast Frames Received" ::= { airFiberStatisticsEntry 13 } rxValidBroadcastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Broadcast Frames Received" ::= { airFiberStatisticsEntry 14 } txValidUnicastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Unicast Frames Transmitted" ::= { airFiberStatisticsEntry 15 } txValidMulticastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Multicast Frames Transmitted" ::= { airFiberStatisticsEntry 16 } txValidBroadcastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Broadcast Frames Transmitted" ::= { airFiberStatisticsEntry 17 } rxDroppedMacErrFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Dropped MAC Receive Errors" ::= { airFiberStatisticsEntry 18 } rxTotalOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Total Octets Received" ::= { airFiberStatisticsEntry 19 } rxTotalFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Total Frames Received" ::= { airFiberStatisticsEntry 20 } rxLess64ByteFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Undersized Frames Received" ::= { airFiberStatisticsEntry 21 } rxOverLengthFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Over Max Length Frames Received" ::= { airFiberStatisticsEntry 22 } rx64BytePackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port 64 Byte Frames Received" ::= { airFiberStatisticsEntry 23 } rx65-127BytePackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port 65-127 Byte Frames Received" ::= { airFiberStatisticsEntry 24 } rx128-255BytePackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port 128-256 Byte Frames Received" ::= { airFiberStatisticsEntry 25 } rx256-511BytePackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port 256-511 Byte Frames Received" ::= { airFiberStatisticsEntry 26 } rx512-1023BytePackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port 512-1023 Byte Frames Received" ::= { airFiberStatisticsEntry 27 } rx1024-1518BytesPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port 1024-1518 Byte Frames Received" ::= { airFiberStatisticsEntry 28 } rx1519PlusBytePackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Greater Than 1518 Byte Frames Received" ::= { airFiberStatisticsEntry 29 } rxTooLongFrameCrcErr OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Too Long Frame CRC Errors Received" ::= { airFiberStatisticsEntry 30 } rxTooShortFrameCrcErr OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Eth Data Port Too Short Frame CRC Errors Received" ::= { airFiberStatisticsEntry 31 } txqosoct0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF TX Octets QOS 0" ::= { airFiberStatisticsEntry 32 } txqosoct1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF TX Octets QOS 1" ::= { airFiberStatisticsEntry 33 } txqosoct2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF TX Octets QOS 2" ::= { airFiberStatisticsEntry 34 } txqosoct3 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF TX Octets QOS 3" ::= { airFiberStatisticsEntry 35 } txqosoct4 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF TX Octets QOS 4" ::= { airFiberStatisticsEntry 36 } txqosoct5 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF TX Octets QOS 5" ::= { airFiberStatisticsEntry 37 } txqosoct6 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF TX Octets QOS 6" ::= { airFiberStatisticsEntry 38 } txqosoct7 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF TX Octets QOS 7" ::= { airFiberStatisticsEntry 39 } txqospkt0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF TX Packets QOS 0" ::= { airFiberStatisticsEntry 40 } txqospkt1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF TX Packets QOS 1" ::= { airFiberStatisticsEntry 41 } txqospkt2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF TX Packets QOS 2" ::= { airFiberStatisticsEntry 42 } txqospkt3 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF TX Packets QOS 3" ::= { airFiberStatisticsEntry 43 } txqospkt4 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF TX Packets QOS 4" ::= { airFiberStatisticsEntry 44 } txqospkt5 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF TX Packets QOS 5" ::= { airFiberStatisticsEntry 45 } txqospkt6 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF TX Packets QOS 6" ::= { airFiberStatisticsEntry 46 } txqospkt7 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF TX Packets QOS 7" ::= { airFiberStatisticsEntry 47 } rxqosoct0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF RX Octets QOS 0" ::= { airFiberStatisticsEntry 48 } rxqosoct1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF RX Octets QOS 1" ::= { airFiberStatisticsEntry 49 } rxqosoct2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF RX Octets QOS 2" ::= { airFiberStatisticsEntry 50 } rxqosoct3 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF RX Octets QOS 3" ::= { airFiberStatisticsEntry 51 } rxqosoct4 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF RX Octets QOS 4" ::= { airFiberStatisticsEntry 52 } rxqosoct5 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF RX Octets QOS 5" ::= { airFiberStatisticsEntry 53 } rxqosoct6 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF RX Octets QOS 6" ::= { airFiberStatisticsEntry 54 } rxqosoct7 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF RX Octets QOS 7" ::= { airFiberStatisticsEntry 55 } rxqospkt0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF RX Packets QOS 0" ::= { airFiberStatisticsEntry 56 } rxqospkt1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF RX Packets QOS 1" ::= { airFiberStatisticsEntry 57 } rxqospkt2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF RX Packets QOS 2" ::= { airFiberStatisticsEntry 58 } rxqospkt3 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF RX Packets QOS 3" ::= { airFiberStatisticsEntry 59 } rxqospkt4 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF RX Packets QOS 4" ::= { airFiberStatisticsEntry 60 } rxqospkt5 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF RX Packets QOS 5" ::= { airFiberStatisticsEntry 61 } rxqospkt6 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF RX Packets QOS 6" ::= { airFiberStatisticsEntry 62 } rxqospkt7 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF RX Packets QOS 7" ::= { airFiberStatisticsEntry 63 } txoctetsAll OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Total Octets Transmitted" ::= { airFiberStatisticsEntry 64 } txpktsAll OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Total Packets Transmitted" ::= { airFiberStatisticsEntry 65 } rxoctetsAll OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Total Octets Received" ::= { airFiberStatisticsEntry 66 } rxpktsAll OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Total Packets Received" ::= { airFiberStatisticsEntry 67 } ubntAirFiberStatusGroup OBJECT-GROUP OBJECTS { radioEnable, radioLinkMode, radioDuplex, txFrequency, rxFrequency, regDomain, gpsSync, txPower, rxGain, maxTxModRate, modRateControl, ethDPortLinkSpeed, linkName, encryptKey, ethFlowControl, ethMcastFilter, ethTrackRFLink, ethLinkOffDuration, ethLinkOffSpacing, txFrequency1, rxFrequency1, txFrequency2, rxFrequency2, txFrequency3, rxFrequency3, channelWidth, txChannelWidth, rxChannelWidth, curTXModRate, radioLinkDistFt, radioLinkDistM, rxCapacity, txCapacity, radio0TempC, radio0TempF, radio1TempC, radio1TempF, rxPower0, rxPower0Valid, rxOverload0, rxPower1, rxPower1Valid, rxOverload1, remoteTXPower, remoteTXModRate, remoteRXPower0, remoteRXPower0Valid, remoteRXPower0Overload, remoteRXPower1, remoteRXPower1Valid, remoteRXPower1Overload, countryCode, radioLinkState, ethDataPortState, gpsPulse, gpsFix, gpsLat, gpsLong, gpsAltMeters, gpsAltFeet, gpsSatsVisible, gpsSatsTracked, gpsHDOP, dfsState, upTime, dateTime, fwVersion, remoteRXGain, radioLinkInfo, ethDataPortInfo, linkUpTime, remoteMAC, remoteIP, dfsDetections, dfsDomain, dfsStateTxFreq1, dfsStateTxFreq2, dfsStateTxFreq3, dfsTimerTxFreq1, dfsTimerTxFreq2, dfsTimerTxFreq3, txFramesOK, rxFramesOK, rxFrameCrcErr, rxAlignErr, txOctetsOK, rxOctetsOK, txPauseFrames, rxPauseFrames, rxErroredFrames, txErroredFrames, rxValidUnicastFrames, rxValidMulticastFrames, rxValidBroadcastFrames, txValidUnicastFrames, txValidMulticastFrames, txValidBroadcastFrames, rxDroppedMacErrFrames, rxTotalOctets, rxTotalFrames, rxLess64ByteFrames, rxOverLengthFrames, rx64BytePackets, rx65-127BytePackets, rx128-255BytePackets, rx256-511BytePackets, rx512-1023BytePackets, rx1024-1518BytesPackets, rx1519PlusBytePackets, rxTooLongFrameCrcErr, rxTooShortFrameCrcErr, txqosoct0, txqosoct1, txqosoct2, txqosoct3, txqosoct4, txqosoct5, txqosoct6, txqosoct7, txqospkt0, txqospkt1, txqospkt2, txqospkt3, txqospkt4, txqospkt5, txqospkt6, txqospkt7, rxqosoct0, rxqosoct1, rxqosoct2, rxqosoct3, rxqosoct4, rxqosoct5, rxqosoct6, rxqosoct7, rxqospkt0, rxqospkt1, rxqospkt2, rxqospkt3, rxqospkt4, rxqospkt5, rxqospkt6, rxqospkt7, txoctetsAll, txpktsAll, rxoctetsAll, rxpktsAll } STATUS current DESCRIPTION "Config Status and statistics for AirFiber monitoring" ::= { ubntAirFiberGroups 1 } ubntAirFiberStatusCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Ubiquiti AirFiber entities." MODULE GROUP ubntAirFiberStatusGroup DESCRIPTION "This group is for Ubiquiti systems AirFiber Radios." ::= { ubntAirFiberGroups 2 } ubntAirMAX OBJECT IDENTIFIER ::= { ubntMIB 4 } -- -------------------------------------------------------------------------------- -- radio table -- -------------------------------------------------------------------------------- ubntRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF UbntRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio status & statistics" ::= { ubntAirMAX 1 } ubntRadioEntry OBJECT-TYPE SYNTAX UbntRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ubntRadioTable" INDEX { ubntRadioIndex } ::= { ubntRadioTable 1 } UbntRadioEntry ::= SEQUENCE { ubntRadioIndex Integer32, ubntRadioMode INTEGER, ubntRadioCCode Integer32, ubntRadioFreq Integer32, ubntRadioDfsEnabled TruthValue, ubntRadioTxPower Integer32, ubntRadioDistance Integer32, ubntRadioChainmask Integer32, ubntRadioAntenna DisplayString } ubntRadioIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the ubntRadioTable" ::= { ubntRadioEntry 1 } ubntRadioMode OBJECT-TYPE SYNTAX INTEGER { sta(1), ap(2), aprepeater(3), apwds(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio mode" ::= { ubntRadioEntry 2 } ubntRadioCCode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Country code" ::= { ubntRadioEntry 3 } ubntRadioFreq OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Operating frequency" ::= { ubntRadioEntry 4 } ubntRadioDfsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "DFS status" ::= { ubntRadioEntry 5 } ubntRadioTxPower OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit power" ::= { ubntRadioEntry 6 } ubntRadioDistance OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Distance" ::= { ubntRadioEntry 7 } ubntRadioChainmask OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Chainmask" ::= { ubntRadioEntry 8 } ubntRadioAntenna OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Antenna" ::= { ubntRadioEntry 9 } ubntRadioRssiTable OBJECT-TYPE SYNTAX SEQUENCE OF UbntRadioRssiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio RSSI per chain" ::= { ubntAirMAX 2 } ubntRadioRssiEntry OBJECT-TYPE SYNTAX UbntRadioRssiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ubntRadioRssiTable" INDEX { ubntRadioIndex, ubntRadioRssiIndex } ::= { ubntRadioRssiTable 1 } UbntRadioRssiEntry ::= SEQUENCE { ubntRadioRssiIndex Integer32, ubntRadioRssi Integer32, ubntRadioRssiMgmt Integer32, ubntRadioRssiExt Integer32 } ubntRadioRssiIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the ubntRadioRssiTable" ::= { ubntRadioRssiEntry 1 } ubntRadioRssi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Data frames rssi per chain" ::= { ubntRadioRssiEntry 2 } ubntRadioRssiMgmt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Management frames rssi per chain" ::= { ubntRadioRssiEntry 3 } ubntRadioRssiExt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Extension channel rssi per chain" ::= { ubntRadioRssiEntry 4 } -- -------------------------------------------------------------------------------- -- airMAX table -- -------------------------------------------------------------------------------- ubntAirMaxTable OBJECT-TYPE SYNTAX SEQUENCE OF UbntAirMaxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "airMAX protocol statistics" ::= { ubntAirMAX 6 } ubntAirMaxEntry OBJECT-TYPE SYNTAX UbntAirMaxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ubntAirMaxTable" INDEX { ubntAirMaxIfIndex } ::= { ubntAirMaxTable 1 } UbntAirMaxEntry ::= SEQUENCE { ubntAirMaxIfIndex Integer32, ubntAirMaxEnabled TruthValue, ubntAirMaxQuality Integer32, ubntAirMaxCapacity Integer32, ubntAirMaxPriority INTEGER, ubntAirMaxNoAck TruthValue } ubntAirMaxIfIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the ubntAirMaxTable" ::= { ubntAirMaxEntry 1 } ubntAirMaxEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "airMAX status - on/off" ::= { ubntAirMaxEntry 2 } ubntAirMaxQuality OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "airMAX quality - percentage" ::= { ubntAirMaxEntry 3 } ubntAirMaxCapacity OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "airMAX capacity - percentage" ::= { ubntAirMaxEntry 4 } ubntAirMaxPriority OBJECT-TYPE SYNTAX INTEGER { high(0), medium(1), low(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "airMAX priority - none/high/low/medium" ::= { ubntAirMaxEntry 5 } ubntAirMaxNoAck OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "airMAX NoACK mode - on/off" ::= { ubntAirMaxEntry 6 } -- -------------------------------------------------------------------------------- -- airSync table -- -------------------------------------------------------------------------------- ubntAirSyncTable OBJECT-TYPE SYNTAX SEQUENCE OF UbntAirSyncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "airSync protocol statistics" ::= { ubntAirMAX 3 } ubntAirSyncEntry OBJECT-TYPE SYNTAX UbntAirSyncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ubntAirSyncTable" INDEX { ubntAirSyncIfIndex } ::= { ubntAirSyncTable 1 } UbntAirSyncEntry ::= SEQUENCE { ubntAirSyncIfIndex Integer32, ubntAirSyncMode INTEGER, ubntAirSyncCount Integer32, ubntAirSyncDownUtil Integer32, ubntAirSyncUpUtil Integer32 } ubntAirSyncIfIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the ubntAirSyncTable" ::= { ubntAirSyncEntry 1 } ubntAirSyncMode OBJECT-TYPE SYNTAX INTEGER { disabled(0), master(1), slave(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "airSync mode - master/slave" ::= { ubntAirSyncEntry 2 } ubntAirSyncCount OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "airSync client count" ::= { ubntAirSyncEntry 3 } ubntAirSyncDownUtil OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "airSync down utilization" ::= { ubntAirSyncEntry 4 } ubntAirSyncUpUtil OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "airSync up utilization" ::= { ubntAirSyncEntry 5 } -- -------------------------------------------------------------------------------- -- airSelect table -- -------------------------------------------------------------------------------- ubntAirSelTable OBJECT-TYPE SYNTAX SEQUENCE OF UbntAirSelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "airSelect protocol statistics" ::= { ubntAirMAX 4 } ubntAirSelEntry OBJECT-TYPE SYNTAX UbntAirSelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ubntAirSelTable" INDEX { ubntAirSelIfIndex } ::= { ubntAirSelTable 1 } UbntAirSelEntry ::= SEQUENCE { ubntAirSelIfIndex Integer32, ubntAirSelEnabled TruthValue, ubntAirSelInterval Integer32 } ubntAirSelIfIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the ubntAirSelTable" ::= { ubntAirSelEntry 1 } ubntAirSelEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "airSelect status - on/off" ::= { ubntAirSelEntry 2 } ubntAirSelInterval OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "airSelect hop interval (miliseconds)" ::= { ubntAirSelEntry 3 } -- -------------------------------------------------------------------------------- -- wireless statistics table -- -------------------------------------------------------------------------------- ubntWlStatTable OBJECT-TYPE SYNTAX SEQUENCE OF UbntWlStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Wireless statistics" ::= { ubntAirMAX 5 } ubntWlStatEntry OBJECT-TYPE SYNTAX UbntWlStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ubntWlStatTable" INDEX { ubntWlStatIndex } ::= { ubntWlStatTable 1 } UbntWlStatEntry ::= SEQUENCE { ubntWlStatIndex Integer32, ubntWlStatSsid DisplayString, ubntWlStatHideSsid TruthValue, ubntWlStatApMac MacAddress, ubntWlStatSignal Integer32, ubntWlStatRssi Integer32, ubntWlStatCcq Integer32, ubntWlStatNoiseFloor Integer32, ubntWlStatTxRate Integer32, ubntWlStatRxRate Integer32, ubntWlStatSecurity DisplayString, ubntWlStatWdsEnabled TruthValue, ubntWlStatApRepeater TruthValue, ubntWlStatChanWidth Integer32, ubntWlStatStaCount Gauge32 } ubntWlStatIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the ubntWlStatTable" ::= { ubntWlStatEntry 1 } ubntWlStatSsid OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SSID" ::= { ubntWlStatEntry 2 } ubntWlStatHideSsid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Hide SSID - on/off" ::= { ubntWlStatEntry 3 } ubntWlStatApMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "AP MAC address" ::= { ubntWlStatEntry 4 } ubntWlStatSignal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Signal strength, dBm" ::= { ubntWlStatEntry 5 } ubntWlStatRssi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RSSI, dBm" ::= { ubntWlStatEntry 6 } ubntWlStatCcq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "CCQ in %" ::= { ubntWlStatEntry 7 } ubntWlStatNoiseFloor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Noise floor" ::= { ubntWlStatEntry 8 } ubntWlStatTxRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX rate" ::= { ubntWlStatEntry 9 } ubntWlStatRxRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RX rate" ::= { ubntWlStatEntry 10 } ubntWlStatSecurity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Wireless security mode" ::= { ubntWlStatEntry 11 } ubntWlStatWdsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "WDS - on/off" ::= { ubntWlStatEntry 12 } ubntWlStatApRepeater OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "AP repeater - on/off" ::= { ubntWlStatEntry 13 } ubntWlStatChanWidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Channel Width" ::= { ubntWlStatEntry 14 } ubntWlStatStaCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Station count" ::= { ubntWlStatEntry 15 } -- -------------------------------------------------------------------------------- -- station list table -- -------------------------------------------------------------------------------- ubntStaTable OBJECT-TYPE SYNTAX SEQUENCE OF UbntStaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Station list" ::= { ubntAirMAX 7 } ubntStaEntry OBJECT-TYPE SYNTAX UbntStaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ubntStaEntry" INDEX { ubntWlStatIndex, ubntStaMac } ::= { ubntStaTable 1 } UbntStaEntry ::= SEQUENCE { ubntStaMac MacAddress, ubntStaName DisplayString, ubntStaSignal Integer32, ubntStaNoiseFloor Integer32, ubntStaDistance Integer32, ubntStaCcq Integer32, ubntStaAmp Integer32, ubntStaAmq Integer32, ubntStaAmc Integer32, ubntStaLastIp IpAddress, ubntStaTxRate Integer32, ubntStaRxRate Integer32, ubntStaTxBytes Counter64, ubntStaRxBytes Counter64, ubntStaConnTime TimeTicks } ubntStaMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Station MAC address" ::= { ubntStaEntry 1 } ubntStaName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Station name" ::= { ubntStaEntry 2 } ubntStaSignal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Signal strength, dBm" ::= { ubntStaEntry 3 } ubntStaNoiseFloor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Noise floor" ::= { ubntStaEntry 4 } ubntStaDistance OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Distance" ::= { ubntStaEntry 5 } ubntStaCcq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "CCQ in %" ::= { ubntStaEntry 6 } ubntStaAmp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "airMAX priority" ::= { ubntStaEntry 7 } ubntStaAmq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "airMAX quality" ::= { ubntStaEntry 8 } ubntStaAmc OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "airMAX capacity" ::= { ubntStaEntry 9 } ubntStaLastIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Last known IP address" ::= { ubntStaEntry 10 } ubntStaTxRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX rate" ::= { ubntStaEntry 11 } ubntStaRxRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RX rate" ::= { ubntStaEntry 12 } ubntStaTxBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "TX bytes" ::= { ubntStaEntry 13 } ubntStaRxBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "TX rate" ::= { ubntStaEntry 14 } ubntStaConnTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Connection Time in seconds" ::= { ubntStaEntry 15 } ubntAirMAXStatusGroup OBJECT-GROUP OBJECTS { ubntStaName, ubntStaSignal, ubntStaNoiseFloor, ubntStaDistance, ubntStaCcq, ubntStaAmp, ubntStaAmq, ubntStaAmc, ubntStaLastIp, ubntStaTxRate, ubntStaRxRate, ubntStaTxBytes, ubntStaRxBytes, ubntStaConnTime, ubntRadioMode, ubntRadioCCode, ubntRadioFreq, ubntRadioDfsEnabled, ubntRadioTxPower, ubntRadioDistance, ubntRadioChainmask, ubntRadioAntenna, ubntRadioRssi, ubntRadioRssiMgmt, ubntRadioRssiExt, ubntAirMaxEnabled, ubntAirMaxQuality, ubntAirMaxCapacity, ubntAirMaxPriority, ubntAirMaxNoAck, ubntAirSyncMode, ubntAirSyncCount, ubntAirSyncDownUtil, ubntAirSyncUpUtil, ubntAirSelEnabled, ubntAirSelInterval, ubntWlStatSsid, ubntWlStatHideSsid, ubntWlStatApMac, ubntWlStatSignal, ubntWlStatRssi, ubntWlStatCcq, ubntWlStatNoiseFloor, ubntWlStatTxRate, ubntWlStatRxRate, ubntWlStatSecurity, ubntWlStatWdsEnabled, ubntWlStatApRepeater, ubntWlStatChanWidth, ubntWlStatStaCount } STATUS current DESCRIPTION "Status and statistics for AirMax monitoring" ::= { ubntAirosGroups 1 } ubntAirMAXStatusCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Ubiquiti AirMax entities." MODULE GROUP ubntAirMAXStatusGroup DESCRIPTION "This group is for Ubiquiti systems." ::= { ubntAirosGroups 2 } END